A lot of Port Charlotte pool cages have been painted twice: once at the factory and once, in a hurry, after a hurricane. The second coat is usually the problem. Applied over corrosion and around rusting screws, it lifts on the sunny side within a couple of years and takes the rust streaks with it. Repainting properly means removing that work and starting from clean aluminum.

ABC Pool Cage Painting repaints aluminum pool enclosures across Port Charlotte, from the canal neighborhoods near the harbor to Murdock, Deep Creek and Harbour Heights. This page covers painting; the Port Charlotte restoration page covers structural repair and the rescreening page covers screen.

Removing Failed Paint

Peeling coating is taken back to a sound edge, the frame is chemically washed, oxidation is removed mechanically and rust is neutralized at every fastener. Mismatched and corroded screws are replaced with stainless steel. Only then is the frame primed and sprayed with an exterior coating made for aluminum.

Canal Homes

Gulf-access canals put salt on the frame daily. Those cages are prepared as coastal work with complete oxidation removal and stainless hardware throughout, docks and seawalls are protected, and coating is scheduled for calm mornings. A fresh-water rinse after windy weather keeps the new finish clean.

Inland Port Charlotte

Open lots and well-water irrigation are the inland conditions. Chalking shows on the sunny beams and iron staining builds along the lower frame. Both are stripped during preparation and we point out the sprinkler heads hitting the cage so they can be adjusted.

Colors

• White across the original 1970s and 1980s neighborhoods.
• Bronze and black on the west side, in Murdock and on renovated homes.
• Custom colors matched to new trim or roofing; product information provided for any deed-restricted community.

Timeline

Two to four working days for most single-family cages in Port Charlotte, longer when failed coating has to be removed from the whole frame. Summer coating is scheduled for dry mornings.

Port Charlotte Pool Cage Painting FAQ

My cage was painted after the hurricane and is already peeling. Can you fix it?

Yes. That is the most common repaint we do in Port Charlotte: failed coating removed, hardware replaced, frame prepared and recoated properly.

Is it cheaper to paint or replace?

When the structure is sound, painting is a fraction of replacement cost and needs no permit.

Do you paint cages on the canals with docks?

Yes. Waterfront equipment is protected and the work is planned around wind.

Can you change the color?

Yes, once the frame is stripped and primed, any exterior color is possible.

More Pool Cage Services in Port Charlotte

Homeowners in Port Charlotte often combine work, so these pages cover the other services we schedule in the area: Pool Cage Restoration in Port Charlotte, Pool Cage Rescreening in Port Charlotte. Statewide details are on our main pool cage painting page.

Nearby Areas We Also Serve

From Port Charlotte our crews also cover Punta Gorda, North Port, Englewood, Rotonda West and Cape Coral. The full list is on the service areas page.

Request a Port Charlotte Estimate

Send a few photos of the enclosure with your Port Charlotte address and we will reply with a written estimate. Call (844) 222-2115 or the Sarasota local line at (941) 260-7336, or use the form below.