Pool Cage Rescreening in Orlando
We inspect, re-screen and repair pool cages and lanai enclosures for homeowners across Orlando, matching mesh and frame details to the original build.
Get a Free Estimate Today With ABC Pool Cage Painting!
Request a free rescreening estimate for your Orlando pool cage.
Orlando’s combination of intense UV exposure, summer storms and afternoon humidity wears down screen mesh faster than most homeowners expect. Panels that looked fine two summers ago can turn brittle, pull loose at the spline, or tear along the frame after a single strong wind event, especially on cages facing west or sitting near open retention ponds.
ABC Pool Cage Painting handles pool screen repair and full rescreening for homes throughout Orlando and Orange County, from older cages in established neighborhoods to newer lanai enclosures in HOA communities. We assess each panel individually, match mesh type and gauge to what the cage was built with, and reinstall using spline and fasteners sized for the existing frame.
Orlando Sun, Storms and Screen Wear
Screen mesh in Orlando works harder than in most of the country. Daily UV load breaks down the polymer in standard fiberglass screen, and the spline channel that holds panels in the frame dries out and loosens with repeated heat cycles. By the time a homeowner calls for pool screen repair in Orlando, the mesh is often already past the point of spot patching.
Summer storm season adds a second stress. Wind-driven rain and sudden gusts find any weak seam first, so a single afternoon storm can turn a stretched or brittle panel into a visible tear. Cages near Lake Nona, Hunter’s Creek and the many retention ponds around east Orange County see this earlier, since open water adds humidity and wind exposure with little buffer from trees or structures.
HOA standards in many Orlando communities also factor in. Some developments specify mesh color or require screen replacement on a set schedule to keep enclosures looking uniform from the street. We check those guidelines during the estimate so the rescreening matches what the community expects, not just what the budget allows.
How We Rescreen a Pool Enclosure
Every lanai screen installation in Orlando starts with a walk of the full cage, panel by panel. We note which sections have UV damage, which have pulled spline, and which frames have loose fasteners or corrosion that needs attention before new mesh goes in. This inspection is also where we talk through mesh options, including standard fiberglass, heavier pet screen, and solar or no-see-um weaves for homeowners dealing with sun glare or small insects.
Once mesh is chosen, we remove the damaged panels, clean out the old spline and check each frame channel for bends or gaps that would keep new screen from seating properly. New spline is rolled in under even tension so the mesh sits flat without sagging or pulling at the corners, which is the detail that most affects how long a rescreen job actually holds up.
We reinstall panels in sequence, checking fit and tension as we go, then walk the enclosure again to confirm every seam is secure before cleanup. Most pool screen replacement projects in Orlando run from one to three days depending on cage size and panel count. A written estimate is free, and it spells out mesh type, scope and timeline before any work begins.
- Full panel-by-panel inspection of mesh and spline condition
- Mesh options including standard, pet-resistant and solar screen
- Frame check for bent track or loose fasteners before rescreening
- Even-tension spline work to prevent sagging or early tear-out
- Final walk-through to confirm every panel seam is secure
Scheduling, Access and HOA Approval
Most pool screen repair in Orlando takes one to three days depending on panel count and mesh type, but scheduling often hinges on approvals rather than labor. Communities in Dr. Phillips, Lake Nona and Winter Garden frequently require an architectural review before any screen enclosure repair, especially when frame color or mesh darkness changes from what is currently installed.
We ask for pool area access during daylight hours and prefer pets and vehicles clear of the lanai while panels are out. Gate codes, side-yard access and locked pool fences should be sorted before the crew arrives, since a missed detail can push a one-day job into a second visit.
- Check your HOA packet for approved screen mesh colors (charcoal and black are standard in most Orange County communities)
- Confirm whether a permit applies if we are also replacing structural framing, not just screen
- Clear furniture and grills a few feet back from cage panels before the scheduled date
- Let us know about irrigation heads or landscaping near the cage perimeter
Mistakes That Shorten a Rescreen Job
A common shortcut in patio screen repair is reusing old spline instead of replacing it with new rubber cord sized to the track. Worn spline loses grip and lets mesh work loose within a season, which shows up first at panel corners and along the bottom rail where wind pressure concentrates.
Mismatched tension between adjacent panels is another issue we see on prior window screen repair Orlando Florida jobs done in a hurry. If one panel is pulled tighter than its neighbor, the looser one sags, collects water after rain, and tears earlier than it should. Matching tension across a full cage wall takes more time but holds up through storm season.
Process and Timeline
- Walk the cage and photograph panels needing screen enclosures repair, noting frame condition along the way
- Confirm mesh type, color and any HOA-required specifications before ordering material
- Remove old screen and spline from each panel track, inspecting the aluminum frame for corrosion or bent channel
- Install new mesh and spline, pulling even tension panel by panel across each wall
- Rehang doors, check latch alignment, and walk the full enclosure with the homeowner before cleanup
A typical rescreen for a mid-size Orlando lanai runs one to three days, with full-cage jobs on larger pool enclosures sometimes extending to four or five days depending on panel count and weather.
Orlando Pool Cage Rescreening FAQ
How do I know if my pool cage needs rescreening instead of patching a few holes?
A few isolated tears or punctures can often be patched, but if the mesh is brittle, chalky, or tearing in new spots every time it rains, the screen has reached the end of its service life. On an estimate, we check how the mesh reacts when pressed at the seams; if it crumbles or pulls away from the spline channel, full rescreening is the more durable fix.
What type of screen mesh holds up best against Orlando sun and storms?
Standard fiberglass insect screen is the common choice for pool cages and holds up well under normal UV exposure, while pet-resistant or heavier-gauge screen is worth considering for enclosures that take direct afternoon sun or frequent storm wind. For cages near open fields or retention ponds, a tighter weave also helps with no-see-ums.
Will rescreening match the existing color and pattern of my frame?
Rescreening replaces the mesh panels, not the aluminum frame, so the frame's existing color stays as it is unless painting is done at the same time. We match the spline and screen tone to what is typical for the panel size and framing style already on the cage.
How long does a full pool cage rescreening take in Orlando?
Most residential pool cages are rescreened in one to three days, depending on the number of panels, roof height, and whether any frame sections need minor repair before the new screen goes in. Larger two-story enclosures or cages with extensive corrosion can take longer.
Do I need HOA approval before rescreening my lanai or pool enclosure?
Many Orlando communities require a notice or approval form before exterior work on a lanai or pool enclosure, even for rescreening, so it is worth checking your HOA's architectural guidelines first. We can provide project details or photos if your association asks for documentation.
Can you rescreen just the pool cage, or do you also repair window and patio screens?
We rescreen full pool cages and also handle smaller jobs such as patio screen repair and individual window screen panels on the same property. If you have a mix of needs, a single visit can usually cover the pool enclosure and any adjacent screens at once.
More Pool Cage Services in Orlando
Beyond rescreening, we also handle pool cage painting for Orlando homeowners looking to refresh faded or chalky aluminum frames. Pool Cage Painting.
Nearby Areas We Also Serve
Crews based in Orlando also take on rescreening and cage painting work in the surrounding Orange County communities. Bradenton, Tampa, Sarasota, Naples, Fort Myers and Cape Coral.
Statewide details, colors and the full process are on our main pool cage rescreening page.
Recent Work
Request an Orlando Estimate
Send a few photos of the screen enclosure along with the property address in Orlando, and we will reply with a written estimate for the rescreening work. For questions before then, call (844) 222-2115.
Last reviewed: October 17, 2026