Trusted Lehigh Acres Pool Cage Specialists

Pool Cage Restoration Lehigh Acres FL

We restore aging aluminum pool cages across Lehigh Acres, addressing corrosion, loose panels and worn screens so the enclosure is sound again.

  • Free Written Estimate
  • Fast Scheduling
  • Built for Florida Weather
  • Licensed & Insured
  • Free Written Estimates

Request Your Free Estimate

Fill out the form for a free written estimate on your pool cage.

  • Free No-Obligation Estimate
  • Fast Response Times
  • No Pressure Consultation
Black pool cage over the pool after a panoramic picture-window screen conversion, with a clear view of the backyard
Black pool cage over the pool after a panoramic picture-window screen conversion, with a clear view of the backyard

Lehigh Acres sits inland from the Gulf but still sees the humidity, summer storms and intense UV exposure common across Lee County, which take a toll on aluminum pool cages over time. Many homes in neighborhoods like Olympia Heights, Westgate and Gateway have screen enclosures installed during the area’s rapid growth years, and those structures are now reaching an age where frames loosen, fasteners corrode and screens tear or sag.

ABC Pool Cage Painting restores these enclosures rather than replacing them outright. Our work covers structural tightening, corrosion removal and treatment, rescreening damaged panels, and refinishing the frame to protect against further weathering. We have worked on cages across Lehigh Acres, from older homes near the canals to newer construction further east, and we scope each project based on its actual condition rather than a standard package.

Get Free Estimate

Why Lehigh Acres Cages Age Faster

LED column light fixture for pool cage posts, held before installation
LED column light fixture for pool cage posts, held before installation

Lehigh Acres sits well inland from the Gulf, so cages here are spared the heaviest salt exposure that corrodes screen enclosures closer to Sanibel or Fort Myers Beach. What the area lacks in salt air it makes up for in sustained summer heat and humidity, which keep aluminum frames and fasteners under constant thermal stress for months at a time.

Afternoon thunderstorms are routine from June through September, and the cycle of wind-driven rain followed by intense UV once the clouds clear is hard on both screen mesh and paint film. Panels stretch, fastener points work loose, and factory finishes chalk and fade faster than homeowners expect for an inland Lee County property.

Many enclosures in subdivisions built during the area’s growth years are now old enough that these effects compound: a frame joint that once flexed slightly now shows play, and a screen that was taut at installation has gone slack. Left alone, this leads to torn panels, rust streaks at fasteners, and eventually structural sag.

Get Free Estimate

Our Restoration Process Step by Step

LED column light fixture for pool cage posts, shown before installation
LED column light fixture for pool cage posts, shown before installation

We start with a walk-around inspection of the full enclosure, checking frame alignment at the footers and roof panels, fastener condition, screen tautness, and any spots where oxidation has started to pit the aluminum. This tells us whether the work needed is cosmetic, structural, or both, and it forms the basis of the written estimate.

From there we treat corrosion at the source, removing rust and chalking aluminum oxide before any coating goes on, then address frame issues such as loose fasteners, bent braces, or panels that have pulled away from their track. Rescreening follows once the frame is sound, using mesh matched to the homeowner’s preference for visibility, airflow, or pet resistance.

Refinishing is the final step: surfaces are cleaned and prepped, then coated with a finish suited to continuous Florida sun exposure. Depending on the scope, a full restoration typically runs from a few days to about two weeks, and we sequence the work so the cage is weather-tight and screened before the coating is applied.

  • Inspection of frame, fasteners, and screen condition
  • Corrosion removal and spot treatment of oxidized aluminum
  • Structural repair of loose joints, braces, or tracks
  • Rescreening with mesh suited to the homeowner’s needs
  • Surface prep and protective refinishing

Get Free Estimate

Timeline, Access and HOA Approval

Black pool cage over the pool after a panoramic picture-window screen conversion, with an open waterfront view
Black pool cage over the pool after a panoramic picture-window screen conversion, with an open waterfront view

Most restoration projects in Lehigh Acres run from a few days to about two weeks, depending on the size of the enclosure and the extent of frame repair needed. Larger lanais in communities like Olympia Pointe or Westminster, or cages with extensive rescreening alongside structural work, sit toward the longer end of that range.

We need clear access to the pool deck and a path through the side yard or gate wide enough for ladders and material. If your property backs onto a canal lot or has a narrow side yard, let us know during the estimate so we can plan equipment staging.

Many Lehigh Acres neighborhoods operate under deed restrictions or HOA guidelines that govern exterior colors and screen enclosure modifications. We can supply spec sheets, color samples, or product documentation needed for an architectural review request before work begins.

  • Typical project length: a few days to two weeks
  • Clear path to the pool area for ladders and equipment
  • Gate and side-yard width noted during the estimate
  • HOA color and material documentation provided on request
  • Work scheduled around your pool use when possible

Get Free Estimate

Mistakes That Shorten a Cage’s Life

White pool cage over the pool after a panoramic picture-window screen conversion, with a clear lake view
White pool cage over the pool after a panoramic picture-window screen conversion, with a clear lake view

A common shortcut is painting over rust spots without grinding them back to bare metal first. Paint applied over active corrosion looks fine for a season, then bubbles and flakes as the rust continues working underneath, often faster than before the paint went on.

Another frequent mistake is patching torn screen panels while ignoring why the frame flexed or the fasteners loosened in the first place. Lehigh Acres sees strong seasonal storms, and a cage with weakened footers or bent bracing will keep stressing the screen no matter how many patches go in.

Skipping a real inspection of fastener corrosion is another issue we see on older enclosures, particularly ones that have never had the frame checked since original installation. Screws and clips corrode from the inside out, and a cage can look sound while several connection points are nearly failed.

Get Free Estimate

Process and Timeline

  1. We inspect the full enclosure, including footers, frame alignment, fasteners and screen condition.
  2. We identify and grind out corrosion spots down to bare, sound metal.
  3. We repair or reinforce any frame sections showing bends, cracks or loose connections.
  4. We prime treated areas and apply protective coating across the structure.
  5. We rescreen panels as needed, matching mesh type to sun and visibility preferences.
  6. We do a final walk-through with you to check fit, finish and screen tension.

Most Lehigh Acres restoration projects take a few days to about two weeks from start to finish, depending on enclosure size and the amount of frame repair involved.

Lehigh Acres Pool Cage Restoration FAQ

How do I know if my pool cage needs restoration instead of just rescreening?

If the frame shows pitting, chalking paint, bent panels, or fasteners that have rusted through, the structure itself needs attention and rescreening alone will not address it. A technician can check the frame condition at the same time screens are inspected and recommend the right scope during a free estimate.

Can you repair a pool cage with rusted or corroded fasteners without replacing the whole frame?

In most cases yes. Corroded screws and brackets can be drilled out, the surrounding aluminum treated for rust, and new fasteners installed without replacing structural beams, unless a section of the frame itself has weakened or bent.

How long does a full pool cage restoration take for an average Lehigh Acres home?

A typical lanai restoration runs from a few days to about two weeks, depending on cage size, the extent of corrosion repair needed, and drying time between coats. Larger enclosures or those with extensive panel damage can take longer.

Do I need HOA approval before restoring a pool cage in my Lehigh Acres community?

Many Lehigh Acres neighborhoods governed by an HOA require approval of exterior color or material changes before work begins, so it is worth checking your community's architectural guidelines first. We can provide product and color information to include with any approval request.

Will the work be delayed by Florida's rainy season or summer storms?

Afternoon thunderstorms common to Southwest Florida from June through September can push back paint curing and screen installation by a day or two at a time. We schedule with that in mind and monitor forecasts so coatings are not applied right before rain.

Do you match the original frame color, or can I choose a different finish?

Either option is available. We can match the existing frame color as closely as possible, or you can select a different finish during the estimate, which is a common choice for homeowners updating an older cage.

Request a Lehigh Acres Estimate

Send a few photos of your pool cage along with your Lehigh Acres address and a description of what you are seeing, whether that is rust, torn screens, or faded paint. We will review the details and reply with a written estimate, or you can reach us directly at (844) 222-2115.

Last reviewed: November 1, 2026